 | 9336A | (none) | (none) | B17528A | [A-C] Copper harpoons (?)
With single barbs and hollow sockets. Near the base of the sockets are the marks of a binding which presumably secured the head to the shaft
[drawing]
[type] VIII (4) |
 | 9336B | (none) | (none) | B17528B | [A-C] Copper harpoons (?)
With single barbs and hollow sockets. Near the base of the sockets are the marks of a binding which presumably secured the head to the shaft
[drawing]
[type] VIII (4) |
| 9336C | (none) | (none) | B17528C | [A-C] Copper harpoons (?) With single barbs and hollow sockets. Near the base of the sockets are the marks of a binding which presumably secured the head to the shaft. [drawing] |
| 9337A | (none) | (none) | B17519 | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
| 9337B | (none) | 1928,1009.242 | (none) | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
| 9337C | (none) | 1928,1009.244 | (none) | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
| 9337D | (none) | 1928,1009.245 | (none) | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
| 9337E | (none) | 1928,1009.247 | (none) | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
| 9337F | (none) | 1928,1009.249 | (none) | [A-F] Copper lance-heads. The tang 045 long shows traces of the read shaft: the blade is a square section rod tapering to a point. [type] Spear 1 (new) |
 | 9338 | (none) | 1928,1009.243 | (none) | Arrowheads(?)
Plain spikes, hollow socketted
[struck out: (VII)?] [struck out: type 5c] [type] 3 (new) |
 | 9339 | (none) | (none) | B16691 | Adze. Gold. With this were found 3 pieces of gold binding probably belonging to the handle, 2 round the middle of the shaft, and one at the end, and with the last a copper nail or stud as pommel: widths of bands 003, 004, and at bottom 0075 shaped: [drawing]
Type 5 (new) |
| 9340 | (none) | (none) | (none) | Reticule. Gold. The case decorated with the chased designs and applique filigree work, L. 008, W. of mouth 0012: In it, suspended from a silver ring, 3 gold instruments, tweezers, spoon, and prick. [drawing] |
| 9341 | (none) | (none) | (none) | Cylinder seal
White shell
Almost all the surface gone, but one small part left showing a lion, a stag and a spotted leopard. Found attached by a silver band to the belt. |
 | 9342A | (none) | (none) | B17525 | [A-B] Arrowheads
Copper
[drawing] 1:1 |
 | 9342B | (none) | (none) | B17526 | [A-B] Arrowheads. Copper. [drawing 1:1] |
 | 9351A | (none) | (none) | B16794 | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
 | 9351B | (none) | (none) | B16800 | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
 | 9351C | (none) | (none) | B16804 | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
 | 9351D | (none) | (none) | B16819 | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351E | (none) | 1928,1009.63 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351F | (none) | 1928,1009.80 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351G | (none) | 1928,1009.73 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351H | (none) | 1928,1009.82 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351I | (none) | 1928,1009.63 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |
| 9351J | (none) | 1928,1009.80 | (none) | Beads. Gold, lapis lazuli and carnelian.
Three gold suspenders, 2 consisting of a gold ring attached to a single piece of gold foil which is a spacer for 3 necklaces. The third is a gold ring set with a gold flower pattern consisting of 12 petals represented only in outline. Also, 2 cones of spiral gold wire attached to a gold foil spacer for 2 strings. 3 Pear shaped gold beads pierced vertically. A piece of gold wire passes through the hole. At the top it is rolled over twice to form a spacer for 2 strings and at the bottom end twisted round once to prevent it from slipping. 3 lentoid lapis beads fitted with gold attachments similar to the above, except that one of the ha spacers for 3 instead of 2 strings. Also, 4 carnelians with similar gold attachments one a lentoid, 2 flattened ball beads, and 1 flattened double conoid. 5 gold pears (slender type) perforated at apex: 6 large gold double conoids and 10 small.
A gold triangle consisting of 6 rows of minute ball beads, 2 lines of minute gold beads soldered together as above are both spacers, 1 for six the other for seven strings. 2 fluted gold ball beads and 1 fluted pear shaped bead.
8 minute gold ring beads.
26 carnelian lentoids.
5 carnelian bugle beads.
5 carnelian double conoids.
4 or 5 carnelian minute ring & ball beads.
2 lapis leaf shaped beads [drawing] thick in section.
7 lapis large double conoids.
32 lapis small double conoids.
2 ribbed conical lapis beads with a straight piece projecting from the base.
4 pear shaped lapis beads.
About 50 smaller lapis beads, ring beads, ball beads, bugle beads, etc. |